Go portable.
Every device includes a rechargeable 400 mAh battery. Runtime depends on your sensor, Wi-Fi use and code.
Climate Kit.
Give your code a feel for the room.
One temperature and humidity module for room monitoring and climate experiments.
climate.sampleKeep the sensor ventilated and away from controller heat. Not a certified food-safety instrument. No touch or force sensor included.
Exactly what’s included.
- 1 × XIAO ESP32S3, SKU 113991114
- 1 × supplied Wi-Fi antenna
- 1 × Grove SHT31 temperature + humidity sensor, SKU 101020212
- 1 × protected 400 mAh LiPo battery (Electrokit 41016062), installed
- 1 × protective enclosure with sensor-specific openings
- 1 × USB-C data/power cable
- 1 × installed wiring and battery connector set, transport switch and insulated mounts
- Device claim code and setup guide
Sensor, controller and battery arrive assembled. Power bank and mains adapter are not included.
Small battery. Longer possibilities.
Plug in for longer.
Connect a USB power bank or a regulated 5 V USB supply through USB-C for longer operation. Especially useful for camera projects.
Check low-current support.
Some power banks turn off when a sensor sleeps. Choose one that stays on at low current and test it with your application. Power bank and mains adapter are not included.
Made to fit the input.
The planned first-batch enclosure is custom 3D-printed black PA12 nylon, with a screw-fastened lid, USB-C opening and sensor-specific openings. Images are concept renders. Final dimensions, fit and finish await the physical prototype. No waterproof rating is claimed.
Seeed XIAO ESP32S3 has an orange user LED and a red charging LED. The concept shows an orange status light through a proposed light pipe; final position depends on the enclosure and board revision. There is no built-in green front-panel LED.
